Product intended for flooring and cladding in ceramic, stoneware, stone and marble.
Product code: 27.010.09.0001
Sanicid Antifungal
Product characteristics
Sanicid is an ideal product for the cleansing and sanitisation of floors, showers and foot basins. It fights fungal infections and helps to prevent mycoses, as well as other skin infections that are easy to contract in place where it is common to walk barefoot. It is also suited for the sanitisation of cladding for showers and the walls of wet equipment, such as steam and heat bath, thalasso bath, Mediterranean bath, and Roman bath.
Instructions for use
With theflooring of the Finnish sauna:
1) Turn off the cabin. Cleaning is recommended at room temperature.
2) Lift the sauna benches (if the specific model allows it)
3) Dilute 80/100 ml of Sanicid antifungal in 10 lt. of water. Clean the entire floor with a cloth dampened in the solution of water and Sanicid.
4) Rinse several times with clean water.
5) Air the environment out at least two hours before opening to the guests.
Note: use the antifungal after the daily washing with the specific product for the type of cladding.
With flooring of steam bath, heat bath, Mediterranean and Roman bath:
1) Turn off the cabin. Cleaning is recommended at room temperature.
2) Use the specific lance equipped with a tank to fill with the Sanicid antifungal; The solution is diluted in the water by pulling the lower handle (see provided user manual).
3) Spray the solution all over the floor, leave it on and then rinse it out with water, pulling the upper lever (see provided user manual).
4) Dry the floor with a squeegee, dragging the remaining dirt towards the drain inside or outside the cabin.
5) Air the environment out at least two hours before opening to the guests.
Note: use the antifungal after the daily washing with the specific product for the type of cladding.
Dosage:
Sanicid guarantees a good cleaning and sanitising effect if 1% diluted in water.
– a litre of Sanicid every 100 litres of water
– 100 cc of Sanicid every 10 litres of water.
* Read the technical and safety data sheet carefully and follow the indicated rules and instructions.
You might also be interested:
Hollu Use
Specific sanitising and disinfectant product for the cleaning of wooden surfaces and cladding for Finnish sauna and soft sauna and for heat and steam baths in natural stone and marble.
Also suited for the cleaning of surfaces or cladding in sky, PVC and polyurethane.
Product code: 96.010.01.1008
(1-bottle pack)
Beta Schaum
Sanitising product for the surfaces of steam and heat baths in ceramic, stoneware, glass and Solid Surface.
Also suited for the sanitisation of bathtubs and water fittings in stainless steel.
Product code: 96.010.01.1009
(2-bottle pack)
Baural
Acidic detergent for the surfaces of steam and heat baths in ceramic, stoneware, glass and Solid Surface.
Specific product against stubborn dirt like: scaling residues and for end-of-jobsite clean-up.
Not intended for cladding in wood, marble and shiny natural or artificial stone, slate and anodised aluminium profiles.
Product code: 96.010.01.1010
(1-bottle pack)