Suited for the cleaning of wooden surfaces and cladding for Finnish sauna and soft sauna and for heat and steam baths in natural stone and marble. Also suited for the cleaning of surfaces or cladding in sky, PVC and polyurethane.
Product code: 96.010.01.1008
Hollu Use is a ready-to-use alcohol-free pH10 biocide for disinfection and sanitisation. It is suited for delicate surfaces, such as the wood of the Finnish sauna and the marble or stone cladding of the heat or steam bath. It easily removes oily stains and residues of sweat and cosmetics. It is also suited for the cleansing and disinfection of water-resistant delicate surfaces and small-sized cladding, such as beauty and relaxation beds, pvc and polyurethane membrane, cupboard for the tea corner and beauty trolleys.
If used according to the instructions indicated on the label, it does not damage the cladding material.
Warning: wear the appropriate PPE when using the product: gloves, mask to cover nose and mouth, and goggles.
With beauty and relaxation beds, pvc or polyurethane membrane, cupboard for the tea corner and beauty trolleys, control panels, mixers, and handrails:
1) Spray the product on a soft cloth and clean the surface.
2) Rinse out the product with a soft cloth dampened with water.
With Finnish sauna and soft sauna:
1) Turn off the cabin before cleaning the benches, walls, stove casing, and ceiling. Cleaning is recommended at room temperature.
2) Spray the product on a soft cloth dampened with warm water. Wipe the surface evenly.
3) Rinse out the product with a soft cloth dampened with warm water and well wrung out. Wipe the surface at least 4/5 times.
4) Lasciare asciugare il rivestimento in legno.
5) Leave the cabin door open for at least two hours before turning the heat on.
With steam and heat baths:
1) Turn off the cabin before cleaning the benches, walls, steam cylinder/cube, ceiling and handshower. Cleaning is recommended at room temperature.
2) Spray the product on a soft cloth dampened with warm water. Wipe the surface evenly.
3) Rinse with plenty of water using the cabin handshower and dry with a soft cloth.
4) Leave the cabin door open for at least two hours before turning the heat on.
For theSolid Surface benches and slats, use our product Beta Schaum.
* Read the technical and safety data sheet carefully and follow the indicated rules and instructions.
It is a ready-to-use liquid product for stainless steel. Non-abrasive and slightly oily, it leaves a protective film on steel, making it shiny and protecting it from scaling, stains, fingerprints and dust.
Product code: 96.010.01.0012
(2-bottle pack)
Sanitising product for the surfaces of steam and heat baths in gres porcelain, stoneware, glass and Solid Surface.
Also suited for the sanitisation of bath tubs and water fittings in stainless steel.
Product code: 96.010.01.1009
(2-bottle pack)
Acidic detergent for the surfaces of steam and heat baths in ceramic, gres porcelain, stoneware, glass and Solid Surface.
Specific product against stubborn dirt like: scaling residues and for end-of-jobsite clean-up.
Not intended for cladding in wood, marble and shiny natural or artificial stone, slate and anodised aluminium profiles.
Product code: 96.010.01.1010
(1-bottle pack)
